SMART-CORE-2D is a DIN rail installation intelligent central control system developed by SCHIDERON and can be applied to any modern intelligent home and commercial intelligent control central control system. The whole system can customize ...
CODE：HRMS-DIM-C04/3
Centralized control of APP
The module can be managed visually and centrally by SCHIDERON intelligent lighting management system (LMS). The data of each channel in the module can be uploaded to the intelligent lighting management system for module data management and status analysis. Scene management is to pre-set the time for the module through the LMS, and then open the corresponding scene mode, to open all or part of the module loop.
Isolated input/output channels
1 channel input, 4 channel output. The control of each channel loop can be configured via software. The maximum load current of a single channel is 3A, and the maximum current capacity of all circuits of the module is 5A.
DIN rail mounting
“Modular” equipment is flexibly installed and applied in the actual environment. The system is equipped with standard 35mm DIN rail mounting, providing convenient installation and maintenance for users.
S-Net bus modular design
The module is designed for the MCU pure hardware architecture and has local data processing and channel control. The overall power consumption of the module is low and the task processing is timely. The module communicates via the bus to ensure the stability and reliability of data transmission. Each module has a corresponding physical address. The DIP dialer can be used to set the address of the module to ensure that each module can operate correctly and accurately receive and execute commands transmitted from the bus.
Relay cutoff and output limit
The module comes with a relay in each circuit to ensure that the circuit can be completely shut down. The minimum and maximum brightness can be set by software.
Zero crossing detection
The module has a single-phase zero-crossing detection circuit. The proprietary zero-crossing filter technology makes each opening/closing action of the module relay at the zero-crossing point of the frequency, thereby prolonging the service life of the module, reducing the flickering of the lighting fixture, and compensating the circuit. Voltage and frequency fluctuations.
Agreement type : S-Net Control channel : Four-channel current sum is 5A Channel : Single channel can withstand a maximum current of 3A
Placeholder : 10P DIN module space（180mm） Weight : 521.0g Temperature : 0°to 40°C
Storage TEM : 0°to 40°C Humidity : 10% to 90% Installation : DIN rail mounting
Size : 180*87*63(mm)
4-way 3A thyristor dimming module (HRMS-DIM-C04/3) is used for front-phase low-voltage electronic (ELV), incandescent (INC), neon/cold cathode (Neon/CC), electromagnetic low voltage Lighting fixtures such as lamps (MLVs) perform leading-edge phase dimming control. The maximum load current of a single channel is 3A, and the maximum current of all circuits of the device is 5A. The independent lighting control, pre-editing scene control and scene timing control can be performed through the intelligent lighting management system (LMS) visualization. The module data can be uploaded to the intelligent lighting management system (LMS) for module status management and data statistical analysis, and the entire data transmission and equipment Control meets the latest industry standards.
HRMS-DIM-C04/3（Simplified Chinese）
2018 / 06 / 15
860.42K
HRMS-DIM-C04/3（Traditional Chinese）
2018 / 07 / 19
1.18M
HRMS-DIM-C04/3-Simplified
2019 / 05 / 28
1.14M
HRMS-DIM-C04/3- Traditional
2019 / 05 / 28
1.19M
